HackieboxNG SD bootloader #
The HackieboxNG SD bootloader consists of two bootloaders (called stages). Both stages share the same codebase and are relocated to 0x20038000 before run.
Preloader (Stage 1) #
The preloader runs a fixed file from the sd card (sd:/revvox/boot/ngbootloader.bin) without any checks. An update for shouldn’t be necesarry in the future. It should be installed as primary bootloader for HackieboxNG to flash:/sys/mcuimg.bin.
All error codes for the preloader are in blue.
Bootloader (Stage 2) #
When no ear is pressed, the bootloader loads the selected standard bootslot. If you hold the big ear while booting you may select a different slot by pressing the small ear for a short moment. Only slots with a file on the sd card can be selected. You may use them in a different way and change the settings within the configuration. The selected slot is indicated by 1-3 blinks in a color assigned to each group. Following slots are available:
Filepath: sd:/revvox/boot/ng-XXXY.bin
Green group - Original firmware #
- ofw1 - OFW bootloader from flash:/sys/pre-img.bin recommended here (as a backup)
- ofw2 - simulate OFW behaviour and load the same image like the OFW would, but with patches
- ofw3 - specific OFW file with patches (optional)
Blue group - Custom firmware #
- cfw1 - Primary firmware (optional)
- cfw2 - Backup firmware (optional)
- cfw3 - (optional)
Cyan group - Additonal firmwares #
- add1 - (optional)
- add2 - (optional)
- add3 - (optional)
Additional #
The first two slots ofw1 and ofw2 are special, as they do not boot from microSD. Slot ofw1 boots from flash:/sys/pre-img.bin and slot ofw2 simulates the ofw bootloader, but allows patching. If you want to run a patched OFW using ofw2 is recommended. As standard ofw1 is set and booted. Change activeImg to ofw2 if you want to boot ofw2 on startup.
All error codes for the bootloader are in green.
Configuration #
The configuration for the bootloader is saved within sd:/revvox/boot/ngCfg.json. All sections or keys starting with an underscore “_” are comments and will be ignored.
General Section #
| Key | Description | Values | Default |
|---|---|---|---|
| activeImg | Sets the firmware slot to select at startup | ofw1, ofw2, ofw3, cfw1, cfw2, cfw3, add1, add2, add3 | ofw1 |
| waitForPress | Waits for an earpress on startup with a blink sequence (blue, green, cyan, black) | true, false | false |
| waitForBoot | Waits for an earpress on before firmware boot with a blink sequence (blue, green, cyan, black) | true, false | false |
| waitTimeoutInS | Timeout in seconds for waitForPress if no earpress (hibernation) | 1-255 | 60 |
| minBatteryLevel | Poweroff voltage to protect the battery. Divide through 2785 to get voltage (Standard 3.18V) | 8869 | |
| ofwFixValue | Magic bytes to be placed into the OFW Image during boot (can be extracted from OFW BL data[-8:-4]) | hex array with 4 bytes | [“4C”, “01”, “10”, “00”] |
| ofwFixFlash | Magic bytes read from the ofw bootloader on flash | ex. /sys/pre-img.bin | |
| serialLog | Enable log to UART (TX) @921600 baud. Only works for debug build! | true, false | true |
| logLevel | Set Log level 0:Trace - 5:Fatal | 0-5 | DEBUG_LOG_LEVEL |
| logColor | Enable colored log | true, false | false |
Firmware Section #
There are nine firmware slots, named ofw1, ofw2, ofw3, cfw1, cfw2, cfw3, add1, add2 and add3.
| Key | Description | Values | Default |
|---|---|---|---|
| checkHash | Check hash of firmware | true, false | true |
| hashFile | Chech hash from ng-XXX?.sha file (true) or from the last 64 byte of the firmware itself (ofw) | true, false | false |
| watchdog | Keep watchdog enabled when booting firmware (if booting fails, box will restart) | true, false | false |
| ofwFix | Add magic bytes to the firmware image to make ofw directly boot | true, false | false |
| ofwSimBL | Read image to boot from flash:/sys/mcubootinfo.bin and load the image from flash:/sys/mcuimgN.bin instead of reading from sd (like the ofw bootloader) | true, false | false |
| bootFlashImg | Read firmware from file on flash | true, false | false |
| flashImg | Path to the file on flash | ex. /sys/pre-img.bin | |
| patches | List of patches to load, see patch directory or patch wiki | [“noCerts.305”, “noPass3.305”] | [] |
SHA256 check #
For each slot an SHA256 check is available. Either as a seperated ng-XXXY.sha file or directly appended to the binary
For example all OFW binaries have a SHA256 appended to their file ending (except the ofw bootloader). A fitting ng-ofw1.sha is provided for the ofw bootloader. The older Hackiebox CFW doesn’t have a SHA256 appened. So you may need to create ng-cfwX.sha yourself if you want to use it. For HackieboxNG the SHA256 hash will be directly appended to the firmware file itself.
Windows #
Command: Get-Filehash FILENAME.BIN -Algorithm SHA256
Linux #
Command: shasum256 FILENAME.BIN
Patches #
The integrated patch engine allows to apply patches to the loaded firmware in-memory. Currently just a simple dup2 patcher style Search & Replace engine ist implemented. You may patch up to 256 bytes per patch and apply up to 32 patches per slot. The patchname is limited to 32 characters. More about available ofw patches
Error codes #
If the bootloader detects a problem, it blinks in a defined pattern. The preloader on the flash blinks blue, the bootloader on the sd blinks green.
SD related codes #
If a sd related problem occurs, the box combines two patterns. The first one indicates where the problem roughly occured. The second one gives you more information about it.
First pattern #
SD not found - 2x500ms, wait 500ms #
Please check if the sd is placed in the holder correctly and the sd is okay. The OFW will blink in red and shut off.
File could not be opened - 3x500ms, wait 2000ms #
Problem opening the firmware file
File could not be read - 4x500ms, wait 2000ms #
Problem reading the firmware file
Second pattern (X times 1000ms) #
- FR_DISK_ERR, /* (1) A hard error occurred in the low level disk I/O layer */
- FR_INT_ERR, /* (2) Assertion failed */
- FR_NOT_READY, /* (3) The physical drive cannot work */
- FR_NO_FILE, /* (4) Could not find the file */
- FR_NO_PATH, /* (5) Could not find the path */
- FR_INVALID_NAME, /* (6) The path name format is invalid */
- FR_DENIED, /* (7) Access denied due to prohibited access or directory full */
- FR_EXIST, /* (8) Access denied due to prohibited access */
- FR_INVALID_OBJECT, /* (9) The file/directory object is invalid */
- FR_WRITE_PROTECTED, /* (10) The physical drive is write protected */
- FR_INVALID_DRIVE, /* (11) The logical drive number is invalid */
- FR_NOT_ENABLED, /* (12) The volume has no work area */
- FR_NO_FILESYSTEM, /* (13) There is no valid FAT volume */
- FR_MKFS_ABORTED, /* (14) The f_mkfs() aborted due to any problem */
- FR_TIMEOUT, /* (15) Could not get a grant to access the volume within defined period */
- FR_LOCKED, /* (16) The operation is rejected according to the file sharing policy */
- FR_NOT_ENOUGH_CORE, /* (17) LFN working buffer could not be allocated */
- FR_TOO_MANY_OPEN_FILES, /* (18) Number of open files > _FS_LOCK */
- FR_INVALID_PARAMETER /* (19) Given parameter is invalid */
Other #
Battery Low - 2x66ms, 2x133ms, 2x66ms #
Battery is low. Value is under the minimum defined in minBatteryLevel. Box hibernates
Hash differs - 10x50ms #
The actual hash of the firmware is different from the one defined in the firmware itself or in the hashfile (depens on the config). Checking the UART-output may help.
Watchdog reset - 5x33ms, 5x66ms, 5x33ms #
The watchdog reseted the box, because the box was in an unintended state or the firmware is broken.
Application error - 3x33ms, 3x66ms, 3x33ms #
Application error. This shouldn’t happen.