Pictures (r1) #
Board #
Detail pictures see iFixit Teardown
Parts #
Processor TI CC3200 #
Technical Information Cortex-M4 arm7e-m thumb
I suggest to get a CC3200 Launchpad for first contact.
Various useful pins (SOP2, TCK, TMS, GND, RST, GND, RX0, TX0) are available through the onboard debug pins.
Flash 4MB ISSI IS25LQ032B #
Firmware is stored in a TI propiertery FatFS but can easily be read over the RX/TX lines of the mainboard when the CC3200 is in flash-mode.
Audio DAC TI TLV320DAC3100 #
I2C address should be 0x18.
RFID Reader TI TRF7962A #
Reading MiFare Classic is not possible without using the chips direct mode which means more work. 1.2 http://www.ti.com/lit/an/sloa248b/sloa248b.pdf http://www.ti.com/tool/TRF796X_TRF7970X_MIFARE_12_2013
Firmware TRF7970ABP: http://www.ti.com/lit/zip/sloc297 Example Salae Logic SPI http://www.ti.com/lit/zip/sloc240
Acceleration Sensor NXP MMA8451Q #
Arduino Library exists. I2C address is 0x1D